Cryogenic pumps for industrial gas filling - Oxygen, Nitrogen, Argon (P200)

MODEL: SBP200-450/165

INTRODUCTION:

The purpose of producing this kind of pump is to solve the problem of filling industrial gas under high pressure. The suitable gases are liquid oxygen, nitrogen, and argon. Thanks to its streamlined design, the pump has a stable and adjustable flow rate. Therefore, it is recommanded by many international companies such as Messer, Linde.

THECNICAL DETAIL:

NO	TERM	DES.
1	TYPE	HORIZONTAL/VF CONTROL/VACUUM JACKET
2	COLD END	SINGLE
3	DESIGN TEMP.	-196°C
4	FLUID	LIN
5	SUCTION PRESSURE	0.2-8 BAR
6	WORKING PRESSURE	150 BAR
7	DESIGN PRESSURE	165 BAR
8	FLOW RATE	200-450 LITER / HOUR
9	POWER	380V/50Hz/3-PH/7.5KW
10	WORK TIME	INTERMITTENT / 24HOURS
11	NET WEIGHT	450KG

ACCESSORIES:

Seal Kits/ Suction Hose/ Gas-return Hose/ Discharge Pipe/ Buffer/ Pressure Switch

BENEFITS & FEATURES:

1. In order to reduce the cold loss, vacuum jacketed cold end is used.

2. Use stainless steel cold end to ensure pump perform below -160℃ steadily.

3. There is a special process, in which the oil of the pump is removed. So that a safe pumping of oxygen condition can be reached.

4. Security interlocking is applied to prevent from over pressure and high temperature.

Hot Tags: cryogenic pumps for industrial gas filling - oxygen, nitrogen, argon, China, suppliers, manufacturers, factory, wholesale, price, LCNG Cryogenic Pumps, reciprocating vacuum pump, LCO2 Cryogenic Pumps, Reciprocating Pumps for LCNG Filling, Gas Cylinder Filling Pumpsds, China LCNG Cryogenic Pumps manufacturers

Cryogenic Pumps For Industrial Gas Filling - Oxygen, Nitrogen, Argon