1. The weight of the pipeline should not be added to the water pump during installation, and there should be separate supporting bodies, so as not to cause deformation to affect the running performance and life.
2. The pump and motor are of integral structure, no need to be aligned during installation, so installation is very convenient.
3. The anchor bolts must be tightened during installation to avoid the impact of vibration on pump performance during starting.
4. Before installing the pump, check carefully whether there are hard objects (such as rocks, iron particles, etc.) in the pump flow path that affect the operation of the pump, so as to avoid damage to the impeller and the pump body during the operation of the pump.
5. For the convenience of maintenance and safe use, install a regulating valve on the inlet and outlet pipes of the pump and a pressure gauge near the outlet of the pump to ensure operation within the rated head and flow range, to ensure the normal operation and growth of the pump. The service life of the pump.
6. When the pump is used for suction, it should be equipped with a bottom valve, and the inlet pipeline should not have too many bends, and there should be no water or air leakage.
7. The discharge pipeline, such as a check valve, should be installed outside the gate valve.
8. Turn the pump shaft after installation, the impeller should not have friction or jamming, otherwise the pump should be disassembled to check the cause.
9. The installation method of the pump is divided into rigid connection and flexible connection installation.