News

Cryopumps are divided into two types: injection-type liquid helium cryopumps and closed-circuit gas helium refrigerator cryopumps.

A cryopump is a vacuum pump that uses a low temperature surface to condense gas, also known as a condensate pump. The cryopump can obtain a clean v...

According to the supply method of the medium, cryopumps are divided into the following types: Storage tank cryogenic pump: low temperature medium (...

Cryopumps are divided into two types: injection-type liquid helium cryopumps and closed-circuit gas helium refrigerator cryopumps.

A cryopump is a vacuum pump that uses a low temperature surface to condense gas, also known as a condensate pump. The cryopump can obtain a clean v...

The main components of the reciprocating pump: pump cylinder, piston, piston rod and suction valve, discharge valve.

The reciprocating pump relies on the reciprocating motion of the piston, plunger or diaphragm in the pump cylinder to alternately increase and decr...

Due to the factors of environment and time when the submersible pump is working, some failures will inevitably occur. In order to improve its worki...

When starting the centrifugal pump, you need to pay attention to a lot of things. Do you need to close the outlet valve when the centrifugal pump s...

1. Check whether there is any looseness in the pipes and joints of the centrifugal pump. Turn the centrifugal pump by hand to see if the centrifuga...

1. The water pipe must be highly sealed. 2. Long-term operation of centrifugal pumps under cavitation conditions is prohibited. 3. It is forbidden ...

1. When the unit is transported to the site, the person with the base has already calibrated the pump and motor. When leveling the base, it is not ...