News

The important component of bearing plunger pump for hydraulic plunger pump is that if the bearing has clearance, the normal clearance of three pair...

The structure of centrifugal pump is characterized by: in a volute-shaped pump case, an impeller which can rotate rapidly is installed in the blade.

[2019.4.2-4.5] China, Shanghai, Expo Exhibition Hall. Huzhou Sanjing Cryogenic carrying multi-stage cryopumps and centrifugal pumps and other star ...

High exhaust pressure can be obtained, and the flow rate is independent of the pressure. The inhalation performance is good and the efficiency is h...

The main characteristics of reciprocating pumps are: 1) high efficiency and wide efficiency area. (2) It can be achieved very well.

The characteristic curve of a centrifugal pump is the inherent characteristic of the pump itself. It has nothing to do with the external use

Usually when the supercharger is selected, the compressor matching line is selected at the right side of surge line B according to the operating ch...

Because the turbocharger often works at high speed and high Supercharger, the temperature of the exhaust gas turbine end of the Supercharger is 700...

The earliest patent application for a Supercharger was in 1905. Dr. Alfred Buchi of Sulzer Brothers Research and Development patented the first tur...

Exhaust gas Supercharger, using 700-900 degrees Celsius exhaust gas from the engine, drives the turbine in the turbine to rotate, the turbine shaft...

A device for increasing the intake pressure of a cylinder by a supercharger and a piston aero engine. Before entering the engine cylinder, the air ...

Centrifugal pump is a vane pump, relying on the rotating impeller in the rotating process, due to the interaction between the blade and the liquid,...